Winegard Trav'ler??

[reubenray]

A fellow camper has a new 2016 Landmark Charleston and he is wanting to get a Trav'ler installed for Directv. Are these models prepped for having this done?

 

[Jesstruckn/Jesstalkn]

YES

They are prewired and also have the reinforced section on the roof to mount it to.

 

[reubenray]

Great - is the pre-wire only the coaxial cables and where will they be at inside plus where would the reinforced area be at?

Also does Landmark run hdmi cables to each TV from a central location and if so where would this location be at?

 

[Jesstruckn/Jesstalkn]

The Winegard control wire harness is in there to
Find the blank outlet cover in the ceiling of the bedroom, you should find one end of the coax and the control wire there.
You can get the structure blueprint from Heartland or Dan my be able to post them for you.
And no HDMI cables. Only the coax
I ran IOGEAR wireless HDMI boxes to the bedroom and out side TV.

Sent from my XT1254 using Tapatalk

 

[jayc]

Glad you got your answer reubenray.

 

[reubenray]

This info helped a lot. The Landmark owner I am helping wants to get the dish install, but he does not trust CW to do it. I installed mine, so I am trying to help him. The dish location on the roof is the only thing I need to give him the info.

 

[Jesstruckn/Jesstalkn]

There should be a wire harness in the bedroom. Mine is with the rest of my antanna hookups in a side cabinet

Sent from my XT1254 using Tapatalk

 

[jbeletti]

To confirm, under that wall plate is coax AND the Travl'er data/power cable.


Sent from my iPad using Tapatalk