PDA

View Full Version : Headboard came down



SLJKansas
04-18-2012, 08:30 PM
While on the way to the State Park we volunteer the head board came off the wall of our 09 3670RL. There were only 5 small finishing nails that were holding it to the wallboard. Looking for ways to refasten the headboard to the wall that won't damage the wall or the headboard.


Thanks in advance.

cookie
04-18-2012, 08:33 PM
I would pull those five finishing nails through the headboard and then re-install it with 10 finishing nails.
This may not be what you are looking for, but that's what I would do.
Get a MinWax grease pencil to match the color of the wood and fill in the holes.

Peace
Dave

Sumo
04-18-2012, 09:15 PM
I would use the finishing nails and some liquid nails.

codycarver
04-18-2012, 09:18 PM
What about liquid nails?
http://www.liquidnails.com/index.jsp

PeternLiane
04-18-2012, 10:28 PM
What about liquid nails?
http://www.liquidnails.com/index.jsp


I would use the finishing nails and some liquid nails.

I have to agree, maybe some finishing nails and Liquid Nails. I've always been amazed how well Liquid Nails works.

rick_debbie_gallant
04-18-2012, 10:40 PM
Liquid nails, and barn spikes.

But really try this: LOCTITE-PL-300-VOC-FOAMBOARD ADHESIVE.

http://www.loctiteproducts.com/p/pl_ca_300_voc/overview/Loctite-PL-300-VOC-Foamboard-Adhesive

JohnDar
04-19-2012, 04:05 PM
This cedar closet lined mod was done only with Liquid Nails. You might need to prop something against the headboard to hold it tight to the wall until the glue sets.

18705

rick_debbie_gallant
04-19-2012, 04:20 PM
But really try this: LOCTITE-PL-300-VOC-FOAMBOARD ADHESIVE.

http://www.loctiteproducts.com/p/pl_ca_300_voc/overview/Loctite-PL-300-VOC-Foamboard-Adhesive[/QUOTE]

I have used the loctite product before and it works great. No real need for a prop. But a few well placed finish nails would help.