vakthund
Well-known member
I have the 6-point Level-Up on my Cyclone and based on comments on this forum wanted to reduce the wear on the hydraulic pump by putting 6" blocks under each leg hence reducing the leg travel and run time of the pump. I tested this on fairly level ground and to my amazement the Level-Up lifted the camper 6" higher. The wheels cleared 3+ inches on both sides. Is this normal behavior?
After some more testing is seems that the rear ODS leg is the key to the puzzle. If I put a 1" board under that and 6" under the rest of the legs the Level-Up it will level as normal. Seems like any height I add to the rear ODS leg the camper will be raised that much higher. Seem like a strange design.
Also, when one of the legs have reached max travel the Level-Up head unit crashes and reboots.
After some more testing is seems that the rear ODS leg is the key to the puzzle. If I put a 1" board under that and 6" under the rest of the legs the Level-Up it will level as normal. Seems like any height I add to the rear ODS leg the camper will be raised that much higher. Seem like a strange design.
Also, when one of the legs have reached max travel the Level-Up head unit crashes and reboots.