Recent content by Albertg

  1. A

    Slider motor laboring

    It's a cable slide. I opened it up and found a couple problems that I resolved. The frame bracket on the inside cables had slide way over to the outer most location causing the cable to hit the frame, very ugly. I installed a couple of bolts taking up the space moving the cable back to the...
  2. A

    Slider motor laboring

    The last two times I brought the slide in the sound of the motor changed. New sounds catch my attention. When the slide first starts coming in it sounds normal but as it gets closer to the end the motor sounds like it's laboring. Getting ready to use it a bunch in October and don't want a...
  3. A

    Norcold N611v locked out on L.P. but now working

    Found frig. not cooling, ice melting in freezer. The amber light was on, no fault code or red light. I turned the unit off and then back on and it fired up. I hooked up to AC power and the green light came on and it started cooling on AC. I unplugged the power and it wouldn't fire up on L.P. I...
  4. A

    Norcold N611 & N811 Not working on either LP or AC but LP light is on

    I have the N611v Norcold. There is a hack on the single button units that I stumbled onto via Youtube. If you hold the button down until the light changes from yellow to green then release as soon as it changes it returns to AC. You can do the same thing to force the unit to go to LP even when...
  5. A

    Hot water not getting to temperature

    Both on electric and propane the hot water was not getting very hot. Problem solved, forgot to close the bypass valve, it was mixing with cold water.
  6. A

    Slide cable has sagging

    My rear lower cable has about a 1 sag in it. The manual talks about removing a cover and adjusting the tension. The only cover I can see is the trim that has no apparent way to remove inside the unit. I can feel the cables behind this trim but again I see no attachments holding the trim on.
  7. A

    GF protected plug cover

    Didn't check the bathroom plug. Reset the GF and it's working now. Thanks so much for the assistance, you saved me a lot of work and frustration. Be safe out there and happy camping. Al
  8. A

    GF protected plug cover

    It has a sticker on it that says it's protected, it's next to the kitchen sink. It's the only plug not working, no breakers tripped or fuses showing blown. Al
  9. A

    GF protected plug cover

    I have a GF kitchen plug that seems to have failed. The plug cover has no screw in it to remove it. Before I bust it thought Id ask if there is a trick or just pry it off? Odd that there is no reset on this plug. Thanks Al
  10. A

    Range hood outdoor vent door.

    Thanks, I'll give it another try. My unit is a 2014 bought it used, I've had it going on third year. I don't believe this has ever been opened. Have a safe and healthy day. Al
  11. A

    Range hood outdoor vent door.

    I just found out about the outdoor vent door. Mine is black and has two push tabs on the bottom. I've pressed very hard and pushed out and up on the tabs but it will not open. Any ideas? Thanks
  12. A

    Porch awning not moving smoothly

    Thanks for the response, I'll give that a try. Al
  13. A

    Porch awning not moving smoothly

    When I open and close the front awning it sticks a little. I tried using lubricant on the channels and roller wheels but nothing seems to work. Am I missing something? Thanks Al
  14. A

    ATF: North Trail - Water pump runs

    I don't think I have that, just a shut off for the holding tank. thanks Al
  15. A

    ATF: North Trail - Water pump runs

    What’s a mixing valve?
Top