Recent content by ArkSlim

Just bought a set of 614's for my 3410 Bighorn (1200# weighed at Livingston) Does anyone have a similar set up and if so what tire pressure are you using . 2nd experience of anyone using these tires. Will be back on the road Saturday hoping for better luck than last Sat. (2 blowouts):confused:

Jim, I have used the search on several of the forums and have gotten some of my questions answered but cannot get an answer to getting the carpet up in order to repair the part of the slide floor that has rotted. Could you please give me the information or refer me to someone that can. PM would...

Sorry to hear of your problem but I am experiencing a similar problem. Recently went through a severe storm and afterward was moving some things around when I found wet carpet along the rear outside wall of both slides, where the electrical boxes are (2010 / 3610). Looked at both outside found...

I know that carrying something on the back of a 5th wheel is bad for the frame (according to my manual) but what about towing a(5x8) small trailer:confused:

Have been thinking of buying a mid-size scooter(150cc) but can't find any info. on how to carry it. Every thing I've found say's don't use a carrier on the back of my 3410. HELP

Thanks guess I'll have to find another way.

Thinking about putting a reciver hitch on the back of my 3610 to carry a mid-size scooter (about 300#) Any recomendations, comments ect. welcome.

Thanks John your info. is appreciated. When I replaced the check valve on the hot water tank the threaded end of the valve broke off in the water heater tank and while working on that I broke one of the 3 plastic elbow's off in the brass conection that is one of the by-pass valves. It took a lot...

After reading all the posts here , I opted to get the cinch tool. Got it on ebay for about 30bucks including shipping. Should arrive in 4-5 days. According to the supplier it works with all steel crimp rings and automatically adjusts for whatever size rings your using. Have a pair of nippers...

Why can't you use hose clamps on your water fittings instead of having to buy all that expensive pex tools?

Thanks for the info. I guess Home depot or minards will have the things I need. Those are the only places around Council Bluffs that I've seen. Today when I was taking the check valve out (Broke off in the tank but I was able to get it out) I hit the shut off valve and broke one of the elbows...

Noticed when we returned from shoping , water running out of the bottom of the trailer. Turned off water supply and unloaded cargo area and pulled panel off to get to the water connections. After getting to the connections found the hot water line leaking from where it comes out of the hot water...

Thinking about using awning bows with my electric awning and using ropes to tie it in place. Any suggestions or comments:confused:

Having trouble keeping air in my Airborne and can't get it up to the line with my 100# compressor. Any suggestions?

We have a bighorn and were very suprised at the excessive noise level during a moderate to heavy rain. The noise is so great that you can't carry on a conversation without raising your voice. Hope this is not just our rig?