Search results

Just bought a set of 614's for my 3410 Bighorn (1200# weighed at Livingston) Does anyone have a similar set up and if so what tire pressure are you using . 2nd experience of anyone using these tires. Will be back on the road Saturday hoping for better luck than last Sat. (2 blowouts):confused:

Jim, I have used the search on several of the forums and have gotten some of my questions answered but cannot get an answer to getting the carpet up in order to repair the part of the slide floor that has rotted. Could you please give me the information or refer me to someone that can. PM would...

Sorry to hear of your problem but I am experiencing a similar problem. Recently went through a severe storm and afterward was moving some things around when I found wet carpet along the rear outside wall of both slides, where the electrical boxes are (2010 / 3610). Looked at both outside found...

I know that carrying something on the back of a 5th wheel is bad for the frame (according to my manual) but what about towing a(5x8) small trailer:confused:

Have been thinking of buying a mid-size scooter(150cc) but can't find any info. on how to carry it. Every thing I've found say's don't use a carrier on the back of my 3410. HELP

Thanks guess I'll have to find another way.

Thinking about putting a reciver hitch on the back of my 3610 to carry a mid-size scooter (about 300#) Any recomendations, comments ect. welcome.

Thanks John your info. is appreciated. When I replaced the check valve on the hot water tank the threaded end of the valve broke off in the water heater tank and while working on that I broke one of the 3 plastic elbow's off in the brass conection that is one of the by-pass valves. It took a lot...

After reading all the posts here , I opted to get the cinch tool. Got it on ebay for about 30bucks including shipping. Should arrive in 4-5 days. According to the supplier it works with all steel crimp rings and automatically adjusts for whatever size rings your using. Have a pair of nippers...

Why can't you use hose clamps on your water fittings instead of having to buy all that expensive pex tools?

Thanks for the info. I guess Home depot or minards will have the things I need. Those are the only places around Council Bluffs that I've seen. Today when I was taking the check valve out (Broke off in the tank but I was able to get it out) I hit the shut off valve and broke one of the elbows...

Noticed when we returned from shoping , water running out of the bottom of the trailer. Turned off water supply and unloaded cargo area and pulled panel off to get to the water connections. After getting to the connections found the hot water line leaking from where it comes out of the hot water...

Thinking about using awning bows with my electric awning and using ropes to tie it in place. Any suggestions or comments:confused:

Having trouble keeping air in my Airborne and can't get it up to the line with my 100# compressor. Any suggestions?

We have a bighorn and were very suprised at the excessive noise level during a moderate to heavy rain. The noise is so great that you can't carry on a conversation without raising your voice. Hope this is not just our rig?

I can not get a grip on the threaded part of the hose that is screwed into the water inlet have tried with vice grips , needle nose pliars even tried to super glue the two parts of the hose together so far nothing has worked?

I connected the water hose to my city water connection and when I tried to unhook the hose threads turn with the connector and I can't get a grip on the hose to hold it so I can take off the hose.:confused:

Have started looking for and filling holes where mice can get into our new 3410. Didn't know there would be so many. The main problems are locating and in many cases not being able to get to where you need to be to fill the openings. The holes around the water lines under the sinks are huge...

Feb. Lunch WE are new members( 1455) in Mission for the winter workamping. Hoping to make the get together as our first Heartland event.

Can awning bows be used on an eletric awning to keep it out for extended time periods? And how much weight should I put on the rear ladder. I have a folding 12ft ladder that is somewhat on the heavy side. Also I have a bicycle with a 35cc motor about 50# would either of these be suitable to...

I hope this is the right place for this. We just took delivery10/8/09 of a 2010 Bighorn 3410. We went to a campground close to the dealer Great Escapes RV, in order to check out the unit we discovered that the off side slide needs adjustment as the rubber seal does not touch the slide at the top...

Can anyone tell me how to add an avatar? I'm semi-literate on computer workings. THANKS

Thanks for all the replys . We are fulltimers and workampers and have been for 9+ yrs. I usually do lite maintance in return for site & utilities and as you know this varies from place to place. Seems like its getting harder to get good jobs.

Nashville Camping If your looking for short time there are several good state parks with camping within short (10-20mile) travel of most activities, and the rates are good.

Are there many workampers on this forum?:confused:

Dealer Choice Make this the second vote for Great Escapes in Gamaliel Ark. We looked at all the rv sites on the internet and finally got our best deal with Dave. We bought after arranging the deal over the phone. We drove from Nashville (500) miles one way. When we got there all was as stated...

Autoformer Thanks for the info. I,m looking at the Hughes and the performance products they appear to be very similar.:confused:

:confused: Thinking of getting an autoformer, 3 questions, Are they worth the expense. Is one brand better than another. Do you need a surge protector in addition to the autoformer? I'm very defiecent in elect. knowledge.:o

Jim add me to the list. Will be staying in Mission in our new 3410. Al Keller (ArkSlim)

Would like to hear from anyone using a 5th Airborne. How well does it work? :confused:

How do you find out about the rallies.We workamp but would like to try to make one or more if we could . We will have our new 3410 in 4-5 weeks.:)

Has anyone stayed at chimney park in Mission Tx. and if so how is it?:)

misunderstanding ??? What I was trying to determine was what hitch in put on a bighorn 3410 at the factory? I know every unit has a hitch installed at the factory so the haulers can deliver the units to the dealers. You hace to know the brand and model # of this hitch to find out what air-ride...

I,m getting a 2010 BH 3410, and would like to know what hitch it has, because I,m trying to deside on a trail air,mor-ride or another couple of brands and need to know the brand and # of the hitch. Also is one of the aftermarket hitches better than another:confused:

What is the factory recomended method to cary a bicycle?

Well after much study and numerous questions some redundent (probally) we made the plunge and bought a 3410. Will be getting it mid Sept. :)

I'm looking at a 3410 and wondering about the TV. Has anyone with the rear TV had any problems or do they hold up well?

I would like to know if the slides on the 2010 / 3410 are insulated . I'm about to buy one and may be spending a couple of winters in a cold (below freezing) area.:confused:

I have contacted a few dealers about the 3410 & 3385 They are telling me that the slam doors and 9ft fridge are options and add to the price. I have looked on this site and according to Jim B. these two things are now standard. I would like to know which is correct?:confused:

Thanks for all the helpful answers. Didn't mean to be repetative but was also interested about slide insulation. Thanks again ArkSlim