Recent content by TX_Clay

2015 Cyclone CY3010 - Have noticed lately the fuel tank popping as cool mornings turn into hot days and again in the evening as it cools off. I can't recall hearing this before now and we spend almost every weekend in the RV. Is there a vent that I need to check or where would I start looking?

Most everyone knows to check your Hydraulic reservoir for Level up and slides when everything has been retracted and stowed. But what if you just want to know if your low or not when your setup? Here is what I did. I extended my Level Up to full height and opened my slide outs ( on level Ground...

Lets start a drinking game. Each time he says "Massive", we all take a shot of tequila. LOL

I like the swivel mount and am thinking of doing the same thing for my 2015 CY3010. I assume that there is a strap to keep it in place while traveling?

Woke up this morning and when I went to the bathroom, the bowl was filled to the rim. Flushed it and pumped the pedal a couple of times. Then watched and could not see any water filling the bowl. Couple hours later, my wife called me and asked if I was playing pranks on her, filling the bowl up...

My Level Up System on my CY3010 has lost its mind. Left out on a 4 day weekend. Pulled into where we wanted to setup. Hit Level Up and everything setup as expected. Sunday, pulled in the slides, retracted the level up system, hooked to the TV, loaded the toys and 5 hours later was back at home...

Thank you very much. Saves me a bunch of work. Several searches on Google didn't turn up one diagram showing as much as page 33 does. Thank you again.

Well, I finally did it, I drained the water heater without checking to see if the electric element was turned off. The one time I didn't check, well, anyway. Looking up the cost of a new element, not as bad as I had thought. Less than $30. However, I don't see anything on the front of the water...

Shouldn't that really say "Once you stop with them, you will know why? LOL

I am pretty sure it is a fender brace and I ordered the one they said was it. But it is not long enough to go from the top of the fender well to the Plastic trim. When I go it, I walked around to the slide out side and sure enough. It would work there, as it mounts to the lip of the slide out...

As I am fitting pieces back to the right side fender well and J wrap after my blowout. I see a place where something was mounted to the top of the fender well directly between the 2 tires. Heartland doesn't show anything on their parts list. Could someone with a 2015 CY3010 take a picture...

Suggestion for the bolt holes, I used to work for a marine repair place and when ever we would mount an outboard motor to the transom of a boat. We would shoot silicon sealant into the hole and while one person pushed the bolt in from one side. Another person would be on the other side with his...

Thanks - Going to be a couple weeks before I get back to it. Have to go out of town the next 2 weekends. I will try to remember to take some pictures before I finish cutting the openings and post here.

I forgot to mention that the plastic fender well end-caps hold the fender in shape and create the box. Heartland doesn't carry them anymore. Apparently not used on any of the current models. luckily, I had one still in tact and took it to a metal shop and they were able to fab them for me. Yes...

As I stated in previous post, tire blew out. Tore the sheet metal for the fender wheel up along with a few of the support bracket. After emailing back and forth with Heartland parts department to make sure we were talking about the same parts, (no exploded view of parts required to build a RV...