Search results

I did as you suggested and switched the control faces of the two thermostats and sure enough, the one from the bedroom had no problem working as expected in its new location and the other one had the same problem when hooked up in the bedroom. Now I guess I need to buy a new one and we should...

You mean switching the one in the bedroom with the one that is not working right? I thought of that but to be honest I'm afraid that it might mess up the other one and then I have no AC at all. As it is now, only the bedroom AC is coming on.

Here is the history. I got an E1 error on the thermostat that controls the AC in the main part of the rig and the heater. I was able to do a reset and go rid of the E1 but now that thermostat only shows Cool, Fan and Off modes. Gone are the Furn and HP modes. Also, even though it shows cool...

Our bedroom slide only comes in about 2 inches then it sounds like the gear is stripping. I opened up the compartment and all seems well. The motor runs and there is nothing blocking. We need to be on the road in an hour or so. Help please.

Sarah and I will be there arriving on the 9th and leaving when it's over.

I had the same concern when they installed my residential fridge. So, I will be replacing the line with a braided one. My concern is, the line that goes into the fridge is still very small (my fridge is a Samsung and the line is blue), I don't know if it can be replaced leaving me with the...

I may have retired from the AF almost 13 years ago, but... Just can't break old habits.

Good Morning Heartland Family Sarah and I are going to be on Whidbey Island staying at the Naval Station and while there we want to go visit the Lavender fields on San Juan Island. I've done the mandatory Google Search looking for ferry service between the islands and all I find are offers for...

Hi Do you have a phone number for Celtic Threads? We ordered our sweatshirts back on 7 Apr 18. According to their web site, our order is "fulfilled" but according to their package tracking info, it has yet to leave their bldg. I've sent and e-mail and awaiting a response but I would like to...

Thanks for the advice. Is packing the bearings something that a person can do themselves or is a shop and pro tools required. As far the breaks I'm going to see if there is something on this forum with a guide. Again, thanks for the guidance.

As Sarah and I get ready to put our rig up at a local state park for 10 days to get it ready for our 8,000 mile trip this summer I got to thinking that I probably should be doing some preventative maintenance on my "drive train". By that I mean axles, brakes, suspension, etc. Vehicle...

Since you are going to be in the 4 corners region, don't forget to visit 4 corners itself. Ok, the landmark that shows where the 4 states meet is actually a bit off but it is still a great place to go.

Kinda early but... 40 foot RV with rejex at 8 per foot and tow vehicle equals $350. Sign me up.

Any chance you could narrow down the scope of this a bit? Colorado is a very big state and there are hiking and biking available just about everywhere. The state offers everything from National and State Parks to great places to boondock. How long will your visit be and are there other things...

I'm having the same slide movement problem and I was wondering, how do you put in the 2x4 to block movement.

Ok. What is a docking donut

Just tried but the system said your mail box is full and you can not accept any more message until you clear some space. :-(

That sounds great. Do you ship? :-)

Thanks Jim. Do you have a brand or model you recommend? By the way, the Ford Trailer Backup Camera works great! Almost don't need Sarah anymore for backing in. ;)

Those look interesting. I'm still learning about .electronics so can you tell me what they do.

I know this thread started last July but I have the same initial question. Does anyone use a bike cover when putting their bikes on a hitch on the back of their trailer?

Rick, is this Gator you are referring to? If so, I think there might be a misunderstanding. The flow thru that I am referring to has the TPMS sensor built into it. Here is an example of one https://eezrvproduct.com/products/tpms-system-flow-through-sensor-1-ea The one you are recommending...

Just wondering for folks who use an aftermarket TPMS, do you use the flow through or anti-theft cap sensor? I like the smaller size of the anti-theft sensor and the lower cost, but the thought of having to remove the cap each time I want to put some air in a tire seems to be a hassle. I've...

My Valor TPMS is going on 5 years old now and just about dead (never really worked that well to begin with) so its time to replace. I've narrowed my choices down to TST and EEZTire. I've seen lots of reviews on the forum on TST but not so much on EEZTire, could be there is a good reason for...

Re: Closet Shelf Supports-Photo Attached This is what I am looking for. [attach=config]57238

Sarah and I ordered ours. Should have them ready to wear at the campout later this month.

I need to replace the adjustable shelf supports that are in the closet where the washer dryer would go in my 2014 Landmark San Antonio. They are the type that go on the sides of the wall and you can push in at each level so you can easily move the shelves up. I've tried searching on google and...

Well, we picked the beast up from the RV repair facility and all the updates were done, and more. Here is a run down (I will post photos shortly) Residential Fridge - all in and working great. the installer did some extras like using the draw front from below the old fridge to cover the...

Thanks, as always for the guidance. I do have a heat gun and I will go slowly. I'll also order the 1" heat shrink. Should be fun!

Here is the inverter I got. - - - Updated - - - Since I don't have the rig here right now and I want to get the heat shrink now so I can be ready when I get the rig, what size would work for 4/0?

Adhesive lined, shrink wrap. I understand shrink wrap but adhesive lined?

Fixed install price quoted before he started the job. The only thing I can figure is he did the other work to make sure everything worked then did the rest. Does not make sense to me, but...

So the installer said that the photo he sent was not the final product. He then sent these two. Except for the shrink wrap tgey look much better. ATTACH=CONFIG]57049[/ATTACH]

I've already figured I am going to redo this and heat shrink is already on hand. I've reached out to the installer and expressed my "concern" about why I provided the correct wire but it was not used throughout. Awaiting his reply. Thanks for the links for the crimp tool and wire. I really...

Ok, let me make sure I understand this all correctly. First, I provided the installer with the large gauge wire, I believe 4/0 that you see hooked up to the switch. The installer then used smaller gauge wire to hook the batteries up to each other when it should have been the same, thick gauge...

Re: Auto Transfer Switch Question- Another Picture So, all the work is done and we are picking up the Beast on Tuesday. I am getting some pictures of the different installs. Here is the one of the 3 new AGM batteries all wired up.

I agree abiut battery size. Placed the order today. another block checked prior to our travel.

Ok, I know it been a while but at times things are overcome by life. Anyway, I was getting ready to buy this based on your recommendation and I see at their website they seem to have a newer model. I was hoping you could take a look at it and see if it is indeed better, claims to have a faster...

Solved: Eye Burning Smell from Furnance I asked the RV tech who was installing my residential fridge to look into the heater smell problem. He found the plastic squirrel cage was broken and pieces of it were in the heater and melting when the heater was on. He removed all the pieces and...

Re: Auto Transfer Switch Question - Picture! Even with paying for installation it turned out way cheaper than we thought it would. That's why we made the move now.