Project LM 365
- Thread starter Jesstruckn/Jesstalkn
- Start date
-
- Tags
- locks
Bones
Well-known member
Unfortunately I will not be allowed to attend Goshen.
Jesstruckn/Jesstalkn
Well-known member
Our tip to Indiana and back was absolutely amazing !!!!! Our best trip ever hands down. 2 months on the road was incredible.
With that said I wanted to share some of our projects.
I have done a ton of them over the last few months. Before, during and after the national rally. While in Elkhart we had the factory do a few things also.
#1) We tossed the junk Carefree toppers and had them install the Dometic toppers. MUCH BETTER
however 1 of them on the livingroom slide was about 3.5 inches to long. (Todays project cut down topper)
#2) We had them replace all 4 of our main slide wiper seals and all of the D-seals. My dealer put the wrong ones on (3") back when it was under warranty. Now we have the correct 2" ones again.
#3) Of course we did the MORryde IS suspension. LOVE IT !!!
#4) Did the new TPMS system. Love it.
#5) Did the new Furrion 7" screen and 3 cameras. Rear and 2 side cameras.
Love the new screen and rear camera. Sides are just ok, not sure I'd do them again. Maybe I need to figure out how use them correctly.
#6) We bought a RV Pet monitor in the silent auction, had set that up.
#7) We started collecting magnets on our amazing journey out and back, Rhonda found a magnet panel to put on the wall. Then as it filled up so quickly, she went on line and found more. I will post some of these thing separately with pictures.
#8) I bought a toilet water treatment system in the vender haul and installed it a few days ago. Not sure I needed it but we'll give it a try.
#9) Bought a inline double water filter system. Also from the vender haul.
#10) Another Vender haul item was the Decals we put on the slide window.
I'm sure there is more I'm forgetting but I will post these for now.
To be continued
Sent from my SM-N950U using Tapatalk
With that said I wanted to share some of our projects.
I have done a ton of them over the last few months. Before, during and after the national rally. While in Elkhart we had the factory do a few things also.
#1) We tossed the junk Carefree toppers and had them install the Dometic toppers. MUCH BETTER
however 1 of them on the livingroom slide was about 3.5 inches to long. (Todays project cut down topper)
#2) We had them replace all 4 of our main slide wiper seals and all of the D-seals. My dealer put the wrong ones on (3") back when it was under warranty. Now we have the correct 2" ones again.
#3) Of course we did the MORryde IS suspension. LOVE IT !!!
#4) Did the new TPMS system. Love it.
#5) Did the new Furrion 7" screen and 3 cameras. Rear and 2 side cameras.
Love the new screen and rear camera. Sides are just ok, not sure I'd do them again. Maybe I need to figure out how use them correctly.
#6) We bought a RV Pet monitor in the silent auction, had set that up.
#7) We started collecting magnets on our amazing journey out and back, Rhonda found a magnet panel to put on the wall. Then as it filled up so quickly, she went on line and found more. I will post some of these thing separately with pictures.
#8) I bought a toilet water treatment system in the vender haul and installed it a few days ago. Not sure I needed it but we'll give it a try.
#9) Bought a inline double water filter system. Also from the vender haul.
#10) Another Vender haul item was the Decals we put on the slide window.
I'm sure there is more I'm forgetting but I will post these for now.
To be continued
Sent from my SM-N950U using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Here is the RV pet monitor we got.
I just copied and pasted from a post i just did answering another tread.
https://heartlandowners.org/showthread.php?p=623975
Sent from my SM-N950U using Tapatalk
I just copied and pasted from a post i just did answering another tread.
https://heartlandowners.org/showthread.php?p=623975
Sent from my SM-N950U using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
When the factory did the living room topper one was to long and one was to short. Mostly because of the placement of the main awning, it needed to be pushed back several inches. I chose the long one and planed on cutting it down when i found time. That time came yesterday.
After figuring out how I was going to accomplish this by myself, I went for it.
I was able to cut the topper material with a razor knife. I cut off 3" there the drilled out the 3 rivets and pulled out the spring pack. Then cut the roll tube about 3.5". Came out perfect.
Sent from my SM-N950U using Tapatalk
After figuring out how I was going to accomplish this by myself, I went for it.
I was able to cut the topper material with a razor knife. I cut off 3" there the drilled out the 3 rivets and pulled out the spring pack. Then cut the roll tube about 3.5". Came out perfect.
Sent from my SM-N950U using Tapatalk
Last edited:
Jesstruckn/Jesstalkn
Well-known member
Here is our magnet wall. This started at the beginning of our trip east. It kinda morfed from there.
We are missing a few license plates for some of the states we were in.
She did a pretty good job on it
Sent from my SM-N950U using Tapatalk
We are missing a few license plates for some of the states we were in.
She did a pretty good job on it
Sent from my SM-N950U using Tapatalk
Oregon_Camper
Well-known member
I just installed this system as well...along with the 7" display. Question...where did you end up putting the display? I can't mount it to the windshield like I did with the prior Furrion "Observation" model. Mine now rides down in the cup holder area, using the tabletop holder.
Need Ford to hurry up and release their 2020 F-450's so I can place my order.
Jesstruckn/Jesstalkn
Well-known member
On the dash in the middle, I put a spacer pad in there to lift it up a bit. I,ll post a picture tomorrow.I just installed this system as well...along with the 7" display. Question...where did you end up putting the display? I can't mount it to the windshield like I did with the prior Furrion "Observation" model. Mine now rides down in the cup holder area, using the tabletop holder.
Need Ford to hurry up and release their 2020 F-450's so I can place my order.
I'm told we can order the new 2020 Ford on August 14th. I already have a appointment set up.
then we play the waiting game again. I DON'T LIKE WAITING !!!!!!
Sent from my SM-N950U using Tapatalk
For20hunter
Pacific Region Directors-Retired
You’ve been a busy boy!!
Rod
Sent from my iPhone using Tapatalk Pro
Rod
Sent from my iPhone using Tapatalk Pro
Jesstruckn/Jesstalkn
Well-known member
Ya that part stinks but I'm happy with how well its working. Alsoilike that i get a text when the power goes outand it switches over to battery power.
Then i know well before it starts heating up in there that we have a problem.
Sent from my SM-N950U using Tapatalk
Then i know well before it starts heating up in there that we have a problem.
Sent from my SM-N950U using Tapatalk
Bones
Well-known member
The thing that worries me is that your dependent on their service and you still have to pay for it. I would probably like to purchase my own service that way I can use it for other things instead of paying only for a dog monitor Like a monitor that would connect Via WIFI through a hot spot for example
Jesstruckn/Jesstalkn
Well-known member
Yes theres gotta be a better system. This was a rally auction item for a good charity that's how we ended up with it.
I will just pay during the Hot months and turn it off the rest of the time.
Sent from my SM-N950U using Tapatalk
I will just pay during the Hot months and turn it off the rest of the time.
Sent from my SM-N950U using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Update 10/4/19: This thing was junk !!! Some of this my have been me not understanding how to operate it from the laptop. I called customer service a few times and they basically brushed me off and said it was a windows problem with my laptop and I needed to take it up with Windows. Emails back and forth until I got fed up. I never was able to use it in the two months I had it. So I finally got them to take it back and refund my money. Of course I had to patch the holes in my roof. Lesson learned Do your research before you buy it not after !!!
WIFI RANGER install
We do a lot of work in the RV and have been struggling in some areas to get a good signal. We use 2 unlimited Verizon mifi's to supply enough gigs. And still run out each month. Verizon meters it after 15 gigs.
With this Wifi Ranger we can pull in from several sources at one time. And I think it will be secure.
You can pick what sources you want to use and how much of each one.
I haven't opened it up on the laptop yet but i will today and see if this dummy can figure it out.
There support seems to be really good so far.
Wish me luck...
Sent from my SM-N950U using Tapatalk
Do your research before you buy it not after !!! WIFI RANGER install
We do a lot of work in the RV and have been struggling in some areas to get a good signal. We use 2 unlimited Verizon mifi's to supply enough gigs. And still run out each month. Verizon meters it after 15 gigs.
With this Wifi Ranger we can pull in from several sources at one time. And I think it will be secure.
You can pick what sources you want to use and how much of each one.
I haven't opened it up on the laptop yet but i will today and see if this dummy can figure it out.
There support seems to be really good so far.
Wish me luck...
Sent from my SM-N950U using Tapatalk
Last edited:
Jesstruckn/Jesstalkn
Well-known member
As of right now I have logged in and opened it up, registraterd, and connected to my home and 1 of my Mifi's.
This thing has pulled up over 40 wifi signals in my area. WOW
My phone pulled up 11.
So far so good. I'm setting it up and waiting for them to call me back to make sure I have everything correct.
Sent from my SM-N950U using Tapatalk
This thing has pulled up over 40 wifi signals in my area. WOW
My phone pulled up 11.
So far so good. I'm setting it up and waiting for them to call me back to make sure I have everything correct.
Sent from my SM-N950U using Tapatalk
Nice install Jerrod! I see you used a DC to DC Power Supply. What voltage did the indoor component require? My last one was 12 VDC.
Wishing you the best with their gear. I know they've done a number of upgrades to it since I used it last, but I found it cumbersome to operate and didn't always work. But when it did work, it was really nice.
I too am in search of a more robust Internet solution for the Sundance. I've used so many things over the year. Still thinking...
Wishing you the best with their gear. I know they've done a number of upgrades to it since I used it last, but I found it cumbersome to operate and didn't always work. But when it did work, it was really nice.
I too am in search of a more robust Internet solution for the Sundance. I've used so many things over the year. Still thinking...
esscobra
Well-known member
data palns with enough gb's are issue - sprint just stopped unlimited but has 100gb/month for 65- att has device that has 50 and 100gb options- if you have mifi type device with grandfathered unlimited plan then you can put sim into cradlepoint - or cradlepoints hav 2 sim slots and you can alternate or switch when data runs out
have over 100 in field lmk if you want to discuss
have over 100 in field lmk if you want to discuss
Jesstruckn/Jesstalkn
Well-known member
I did a quick repair job on the wire support under mt livingroom slide. I cut 3-1/4" off of a plastic mudflap and riveted it to the broken strap. This should do the trick.
Sent from my SM-N950U using Tapatalk
Sent from my SM-N950U using Tapatalk
Last edited:
