TMRoper1669
Member
Had water dripping from the center of my 2015 4000 this weekend on a camp trip, needing to make sure I saved as much water as possible I dropped enough of the underbelly to take a look and to my suprise, the hose that connects the 2 tanks was sitting on a cross memeber which rubbed a hole in the hose and the tank supports were bowed bad. I was a RV Tech for a few years and have seen tank supports bowed due to the weight and the width of the tank but nothing this bad. Is this a common problem. If this is a common problem, the supports need to be addressed so the tanks won't drop allowing the connector hose to make contact with the cross member. I'm 200+ Miles from my dealer and don't want to take it all the way if all they are going to do is change the hose.