I have a Big Country 3300 with three slides. One of the slides leans toward the inside on the top. Because of this when the wind come from the direction of that slide I get air infiltrating the inside of the trailer. My question is, are there instructions for me to adjust the slide so that it seals better at the top? I can stick my fingers between the slider and the wall there is about 1 1/2 difference between the slider on the top and the bottom.
Big Country Slide is leaning in and allows air to infiltrate during a wind
- Thread starter EdK
- Start date
-
- Tags
- big country slider
jimtoo
Moderator
This is Lipperts web site where you will find instructions on adjustments.
But make sure the slide is going all the way out by looking under the slide inside on the floor when it is only part of the way out to make sure nothing is under the slide and stopping it before it moves that last 1/2 inch on the bottom so the top will tilt out and seal. If everything is clean and OK... call them.
Lippert Components Inc.
866-524-7821
Jim M
But make sure the slide is going all the way out by looking under the slide inside on the floor when it is only part of the way out to make sure nothing is under the slide and stopping it before it moves that last 1/2 inch on the bottom so the top will tilt out and seal. If everything is clean and OK... call them.
Lippert Components Inc.
866-524-7821
Jim M
Similar threads
- Locked
