Can i alter slide sequence?

[GWZ1948]

2013 BIGHORN 3610RE VIN - 5SFBG3626DE248371

JUST TRING TO GET A BITE FOR LUNCH!!

The current slide sequence upon opening the living section - off door side kitchen first, off door lounge second, door side lounge third.
Upon closing the living section - same as above (with door side lounge blocking access to the fridge)
Is there a way to alter the sequence (when traveling) to open the door side lounge only to get access to the fridge for lunch w/o opening the other two slides?

There are (3) hydraulic valves in the front storage compartment - 2 marked "off door", 1 marked "door side". Are these to be used (closed) to affect the sequence?
Any advice and coaching tips will be greatly appreciated!

 

[SGeohagan]

If you close the 2 valves marked off door, only the door slide will extend when you press the button. Have done many times.

 

[Gizzy]

I believe they open with the one of least resistance first. You can control which one you want to open individually by closing the valve on the ones you do not want to open. On ours the valves were hard to open/close, but with more use they got much easier. Just close them all then open one at a time so you know which valve operates each slide. Pretty easy to figure out. Hope this helps.

 

[GWZ1948]

Just close with the (valves ) w/ the knurled knobs marked "off door"? Or is there another method of closing the valves?

 

[Bob&Patty]

Nope, just the valve knobs. You could get a little crazy and smash the hydrolic lines with some vise grips but probably not a good idea.