Entrance Door Leveling

[rpotter]

Is it normal for the main entrance door to have a significant difference in gap on the door edge where it meets the frame at the top as compared to the bottom when level using the hydraulic auto level system. Bighorn 3570rl. About a 1/4" difference.


Sent from my iPad using Tapatalk

 

[JohnD]

Our entrance door on the Prowler has about a 1/4 to a 1/2 inch gap on both sides and around the top.

The cut is not even and in some spots where the factory nailed the trim over the gap, the nails didn't have anything to grab in to.

 

[danemayer]

Is it normal for the main entrance door to have a significant difference in gap on the door edge where it meets the frame at the top as compared to the bottom when level using the hydraulic auto level system. Bighorn 3570rl. About a 1/4" difference.


Sent from my iPad using Tapatalk

By asking "when level using the hydraulic auto level system", are you saying that the way the door meets the frame varies depending on how the unit was leveled?