Filling fresh water tank on 3610 BH

[Trenk]

Has any one else had problems filling the fresh water tank on there big horn? I went to fill it and and it pushed more water out than i could get in it, I ended up cutting the flow back to a trickle to fill the tank

 

[jnbhobe]

You probably have a blocked or kinked vent line.

 

[57chevyconvt]

Had the same problem with my 2010 BH 3410RE. Had to drop the bottom corrugated plastic underpinning to find that the water fill line was badly crimped where it was run through the floor frame support that runs from side to side, located on the inside of the I beam frame rails. I also make a filler hose that is about 2' in length from a piece of 1/2" clear plastic tubing (soft and flexible) that is fed in to the corrugated fill line. No longer have the problem with fill rate.

 

[Gizzy]

Had the same problem. Before you start tearing things to see what is wrong, I suggest you cut a length of hose as suggested earlier (I just cut a section of regular 1/2 inch hose) and see if you can't fill with it inserted. It cured my problem, might cure yours.