Moisture on doors

[JMildfelt]

I am having some issue with the doors sweating all the time. I am not going to buy 2 doors @ $720.00 Each. You just can't buy the seals, (RIP OFF) I am trying to make the seal do their job by using some string to puff up the door seals. Norcold told me to use the "dollar bill test" to see if the seal are doing their job. NOT. So I am using some nylon string and will see what happens. I have included a picture. Hope this works, can't hurt now can it. Damage is already done. What a rip off this manufactures are now days all for the sake of profit.

MAD AS ****!

Thanks for the eat to cry on .

2012 Bighorn
2013 Silverado HD 2500 Diesel

 

[danemayer]

I realize you have a Norcold, but these instructions from Dometic might be helpful.

If a gasket is not sealing properly, warm the gasket material with a hair dryer. Then close the door and the magnetic strip should pull the gasket to the metal frame. Leave door closed until the material has cooled. Then recheck for a positive seal. If a positive seal cannot be achieved, replace the door gasket.

 

[JMildfelt]

I realize you have a Norcold, but these instructions from Dometic might be helpful.

Darn fridge is plastic and no magnetic seal. Thanks for some information that even the makers of the fridge will not tell you or even help you.