Project LM 365
- Thread starter Jesstruckn/Jesstalkn
- Start date
-
- Tags
- locks
Jesstruckn/Jesstalkn
Well-known member
Jesstruckn/Jesstalkn
Well-known member
Sorry didn't see the 2nd questionYa you bet
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
billyjoeraybob
South Carolina Chapter Leaders-Retired
Our Ashland came with knobs from the factory. However, I wish they had mounted them like you did. The top two are mounted in the same location as yours, but the bottom two are mounted half way down the doors. This makes my 5' 17" self have to bend over to reach them. The doors that are to the left of the stove area are mounted like yours. Go figure.
Jesstruckn/Jesstalkn
Well-known member
Well I guess I'm glad they didn't mount mine then. You should check with Heartland and see if they'll send you 2 new doors and knobs. If they won't give them to you see how much they are to purchase. Might be worth it to you. That would bug the heck out of me
Sent from my XT1254 using Tapatalk
billyjoeraybob
South Carolina Chapter Leaders-Retired
I might just have to give them a call
CarterKraft
Well-known member
I wonder if they just pinned it out wrong (wrong color wire in the wrong spot).
After following your mods, I think I want to try this LED dimmer. http://www.amazon.com/dp/B00S667XZA...olid=1L18B7SA0QTPG&coliid=IR6KTHLI08B5C&psc=1
The $50 dimmers are out of my price range but these dimmers at $19 are more fitting.
There are several styles but all are touch interface. I would prefer the style as you used with tactile on/off switches but I don't need to put $150 worth of dimmers in the trailer right now.
Jesstruckn/Jesstalkn
Well-known member
Hey those are cool too
Let us know how they work.
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Another Mod
Same as Jim B. did on his rig.
Every time I would pull the cap off I always got a cup or two of gray water on the ground.
Fixed that problem and I'm hoping I can open both of the gray valves on the coach and have them even out, that way I can take more showers and wash less dishes.
That will only work if both tank are at the same level in the belly of the coach. So I guess I will find out next week.
Sent from my XT1254 using Tapatalk
Same as Jim B. did on his rig.
Every time I would pull the cap off I always got a cup or two of gray water on the ground.
Fixed that problem and I'm hoping I can open both of the gray valves on the coach and have them even out, that way I can take more showers and wash less dishes.
That will only work if both tank are at the same level in the belly of the coach. So I guess I will find out next week.
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
A follow up on the LED dimmer switch
I received the new "Diamond" brand dimmer switch today.
wired it in and wallah it works perfectly
So it's definitely something with "JR Products" switch that doesn't work with these light.
I notice the diamond one says pulse wave LED dimmer on it
Sent from Jerrod's phone with Tape talk
I received the new "Diamond" brand dimmer switch today.
wired it in and wallah it works perfectly
So it's definitely something with "JR Products" switch that doesn't work with these light.
I notice the diamond one says pulse wave LED dimmer on it
Sent from Jerrod's phone with Tape talk
Last edited:
Jesstruckn/Jesstalkn
Well-known member
No projects today
Sent from Jerrod's phone with Tape talk
Sent from Jerrod's phone with Tape talk
Last edited:
Jesstruckn/Jesstalkn
Well-known member
Well maybe 1 or 2 small ones
I finally talked Rhonda into letting me mount the remote holder on the wall next to my chair. And one for my phone next to my side of the bed.
Sent from Jerrod's phone with Tape talk
I finally talked Rhonda into letting me mount the remote holder on the wall next to my chair. And one for my phone next to my side of the bed.
Sent from Jerrod's phone with Tape talk
Jesstruckn/Jesstalkn
Well-known member
Frances beach half moon bay CA.
Sent from Jerrod's phone with Tape talk
Sent from Jerrod's phone with Tape talk
PWM = Pulse Width Modulation
A PWM dimmer is what is typically needed to properly dim LED lights - so I've been told.
Jesstruckn/Jesstalkn
Well-known member
Ya Bones this tape talk made my life so much easier to post pictures.
When I first started posting pictures I was sending them to my email, downloading them to my computer, then attaching them from there 1 at a time
Now with Tape Talk point shoot and post. Love it
Those of you that don't have it on your phone yet should download the free app.
Sent from Jerrod's phone with Tape talk
When I first started posting pictures I was sending them to my email, downloading them to my computer, then attaching them from there 1 at a time
Now with Tape Talk point shoot and post. Love it
Those of you that don't have it on your phone yet should download the free app.
Sent from Jerrod's phone with Tape talk
Jesstruckn/Jesstalkn
Well-known member
Ya the JR products dimmers were LED dimmers but didn't work.
Sent from Jerrod's phone with Tape talk
Jesstruckn/Jesstalkn
Well-known member
First trip out with our new Snap-Pads and I love them.
I actually think the rig feels more stable and has less movement inside when walking around.
They are one of the best inventions yet, paired up with Level up you can't beat it.
Unfortunately for you guys they are still not available to the public just yet. When I know more I will pass it on to you.
They are a must have in my book.
Sent from Jerrod's phone with Tape talk
I actually think the rig feels more stable and has less movement inside when walking around.
They are one of the best inventions yet, paired up with Level up you can't beat it.
Unfortunately for you guys they are still not available to the public just yet. When I know more I will pass it on to you.
They are a must have in my book.
Sent from Jerrod's phone with Tape talk
Last edited:
