Project LM 365
- Thread starter Jesstruckn/Jesstalkn
- Start date
-
- Tags
- locks
Bones
Well-known member
I like this version a lot Jerrord - nice work. When you're at a rally and it's rig tour time, you're going to need to put out some snacks, provide seating, a features sheet and have an intermissionGreat work.
I want popcorn.!!!!!!!
Jesstruckn/Jesstalkn
Well-known member
LOL thanks Jim this one came out really nice.
Also that silverware drawer Mod that I did a while back has relly been working out well. It was a night and day difference on organizing the silverware and finding what your looking for when you open the drawer from either side. It was a bit costly for me to pay a cabinet guy to dissemble the drawer, cut it down, reasemble it, and make that slide tray. ($300)
That might be a good feature for the factory to add in. I'm sure it wouldn't cost much more for them to do it. The consumer would sure love it.
I'll sell them my Patton $$$$. LOL
Sent from Jerrod's phone with Tapatalk
Also that silverware drawer Mod that I did a while back has relly been working out well. It was a night and day difference on organizing the silverware and finding what your looking for when you open the drawer from either side. It was a bit costly for me to pay a cabinet guy to dissemble the drawer, cut it down, reasemble it, and make that slide tray. ($300)
That might be a good feature for the factory to add in. I'm sure it wouldn't cost much more for them to do it. The consumer would sure love it. I'll sell them my Patton $$$$. LOL
Sent from Jerrod's phone with Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Ok but you gotta eat it outside with the kidsI want popcorn.!!!!!!!
LOLSent from Jerrod's phone with Tapatalk
I want popcorn.!!!!!!!
Me too!
Jesstruckn/Jesstalkn
Well-known member
No that was the wood shop at my dealer $107 an hour. I didn't ask how much ? I asked how soon can I have it back.
Live and learn right.
Sent from Jerrod's phone with Tapatalk
Live and learn right.
Sent from Jerrod's phone with Tapatalk
Agreed! Sometimes we just want what we want. I had a neighbor design and fab my dual receiver hitch. I asked how much per hour but not how many hours. It'll take what it takes. This guy is a perfectionist. Turned out great. Steel isn't cheap but his hourly "neighbor rate" is. Think it cost me $360 all in (steel, supplies and labor at $25/hr). I was on a VERY tight timeline (days) and wanted it for an upcoming 3-rally trip.
Jesstruckn/Jesstalkn
Well-known member
That is, the "I want it now" price $$$$$
My single receiver hitch that I put on mine, was about $240 I think
Sent from Jerrod's phone with Tapatalk
My single receiver hitch that I put on mine, was about $240 I think
Sent from Jerrod's phone with Tapatalk
Last edited:
Jesstruckn/Jesstalkn
Well-known member
Mod still not done
I hadn't finished my 7-way cord Mod yet, and good thing because today I was in my shop trailer and found a lighter duty cord. Its a lot lighter then that extra heavy duty green one that I was going to use.
The little one is a flat RV 7-way cord I had bought from an on-line RV parts dealer. It's too small, and too short, to plug into the in the bed plug. I thinking it will pull out when I make a hard right turn.
The big green one is a big rig round plug, I had cut the ends off of already, (oh well) to put the RV plug on. It's too big and too heavy.
Then the middle one is the one I found today. It's just right I will get it put on one day soon. I might leave the stock long cord on and just zip-tie it up in the pin box just in case I ever have someone else pull the coach that doesn't have the plug in the bed, or if I ever have trouble with the inner plug
Sent from Jerrod's phone with Tapatalk
I hadn't finished my 7-way cord Mod yet, and good thing because today I was in my shop trailer and found a lighter duty cord. Its a lot lighter then that extra heavy duty green one that I was going to use.
The little one is a flat RV 7-way cord I had bought from an on-line RV parts dealer. It's too small, and too short, to plug into the in the bed plug. I thinking it will pull out when I make a hard right turn.
The big green one is a big rig round plug, I had cut the ends off of already, (oh well) to put the RV plug on. It's too big and too heavy.
Then the middle one is the one I found today. It's just right I will get it put on one day soon. I might leave the stock long cord on and just zip-tie it up in the pin box just in case I ever have someone else pull the coach that doesn't have the plug in the bed, or if I ever have trouble with the inner plug
Sent from Jerrod's phone with Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Bones
I'm not sure why I didn't even think of that
your right that will make my job of wiring 2 cords in one box a whole lot easier. I have used those 7-way boxes on my trucks for years. I think I even have one somewhere. Thanks for knocking me in the head I will definitely be doing that. Sent from Jerrod's phone with Tapatalk
Jesstruckn/Jesstalkn
Well-known member
I just stopped at Profleet truck parts to pick one up they were out of the black one's, they'll have one for me tomorrow.
But they did have a smoked clear one, kinda see through.
I'm on the fence with that one if I cut all of the wire just the perfect length and make it look all nice and pretty, it might be kinda cool.
Or I could go with the black and cover the mess.
Sent from Jerrod's phone with Tapatalk
But they did have a smoked clear one, kinda see through.
I'm on the fence with that one if I cut all of the wire just the perfect length and make it look all nice and pretty, it might be kinda cool.
Or I could go with the black and cover the mess.
Sent from Jerrod's phone with Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Also dremald out the grooves in the shower door track would have done a better job with a longer bit.
Sent from my XT1254 using Tapatalk
A follow up on the shower track modification
It definitely made a big difference.
Bones
Well-known member
I got the black cover. The smoke sounds nice but not to sure who would see it other than yourself.
- - - Updated - - -
Ok so I am to assume all the water drains nicely out of the track then. My shower door has separated from my wall so I may just take the whole thing out and do this to the track as well. I wish I could get a nicer shower enclosure in there instead of the cheap plastic wrap.
Jesstruckn/Jesstalkn
Well-known member
Most of the water dose. You can see it was almost a 1/4" of water sitting in there. I ground down all 3 or 4 (can't remember how many there was right now) drain sections across the door track. So now when you rinse it out most of the water drains out and the rest dries up. Before you had a 1/4" of water just sitting in there for a long time.
Sent from Jerrod's phone with Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Another Mod I did a long time ago, if you can call it a Mod.
When we took delivery of our LM365 in May, the dinette table was not level at all !!! It was almost 3/4" off. I took the panel off under the table and removed the mounting screws and installed shims (washers) until it was level. Probably 5 on the bottom and 3 in the middle. Now the table is level and it gave us a little more clearance for leg room getting in and out.
When we took delivery of our LM365 in May, the dinette table was not level at all !!! It was almost 3/4" off. I took the panel off under the table and removed the mounting screws and installed shims (washers) until it was level. Probably 5 on the bottom and 3 in the middle. Now the table is level and it gave us a little more clearance for leg room getting in and out.
Jesstruckn/Jesstalkn
Well-known member
LOL ya I'm working on my garage at home doing epoxy floors, new cabinets and paint so the rig is on the back burner right now.
All of my tools and supplies are all boxed up and going into a POD for a few weeks.
Sent from Jerrod's phone with Tapatalk
All of my tools and supplies are all boxed up and going into a POD for a few weeks.
Sent from Jerrod's phone with Tapatalk
