Slide out weather stripping

[BandK]

Is there a kit or any recommendation for replacing the weather stripping on the slides? 2013 34qsrl. Mine are falling apart.

Thank you

Sent from my XT1585 using Tapatalk

 

[Roller4tan]

This is what I used from Amazon. The slide seals are two pieces, a flat wiper seal and a D seal bulb type. The D seal usually goes bad. A bit pricey, but simple to change out.

AP Products 018-312-EKD Black 1" x 15/16" x 35' D seal.​

 

[BandK]

This is what I used from Amazon. The slide seals are two pieces, a flat wiper seal and a D seal bulb type. The D seal usually goes bad. A bit pricey, but simple to change out.

AP Products 018-312-EKD Black 1" x 15/16" x 35' D seal.​

Great, thank you!


Sent from my XT1585 using Tapatalk

 

[wdk450]

I have found that the round washers on the screws at the ends of the D seals tend to pull through the rubber. A few years ago I came up with the idea of using flat woodworking steel mending plates on the ends of the D seals instead of the round washers. Here is a picture of what I am talking about: