Search results

I see all three of your posts. If you click on What's New you will not see your posts because they are not new to you. If someone replied it will then show on What's New. To see your posts click on your username then click on Find Latest Posts. Peace Dave

I've repaired a couple sinks that have dropped down and I believe that a good sealant along with the clamps help hold the sink in place. As much as I hate using silicon caulk it does have it's place. I used clear silicon to hold and seal the sink. Peace Dave

Hello Faves61 and welcome to this great forum. To level side to side you need to put some sort of blocking under the tires on the low side before you unhitch. So when you pull into your site before unhitching check your side to side level. You may have to pull your trailer up on some 2x8 or...

You can find Mark and Linda by looking at post #3 of this thread. Peace Dave

Check out post #1 of this thread. Peace Dave

I wouldn't rely on ohming the heater element. About six years ago I had the same issue and when I checked the resistance it was good. I checked all electrical circuits involved and all was good. Scratched my head and went to the store for a new heater element. That replacement element has been...

Hello Scott. And welcome to this awesome forum. There should be three valves at your water heater. The center valve should be off and the other two on. Be sure that the faucets in the shower are off and if there is an outside shower be sure those faucets are off as well. Peace Dave

Thanks, but I have a couple pair and with the bowl still on my arm isn't long enough. And I have one of those springy grippers but couldn't get enough grip with it. It's out. Peace Dave

FFAaronM27, welcome to this great forum. Not sure about your particular TV but you may I've to go to the menu and configure the input. Peace Dave

Re: Water Heater Fixed now, No Water!! Did one of the fittings have a check valve in it? If so was the new one correctly oriented with the water flow? Peace Dave

Len, are you trying to get me to stick my arm down the hole next? Peace Dave

Michael, I used an extra long needle nose that allowed me to reach the bend in the pipe which is where the brush stopped. First time I grabbed it it slipped out of my pliers and went a little deeper. Squeeze the pliers tight. Oh, that pliers also has a 90° bend at the tip. Peace Dave

As long as you don't totally block off a register you should be fine. I don't have a Rushmore but I have used the furnace with the slides closed. Peace Dave

Yeah Len I got it out with one of the tools that my wife complains I have too many of. Best brush I can find is on the shopping list. Peace Dave

Hello Tinklor and welcome to this great forum. Typically there is a flap on one door that swings over and makes contact with the other door. Do you see a flap on one of the doors? What brand and how old is it? Check my sig below for information on joining the Heartland Owners Club. It's free and...

I guess I was a little to aggressive with the toilet brush today. So my question is, what do you think happened to the rest of it? Peace Dave Sent from my SM-G965U using Tapatalk

If your recliner plugs into a 120 volt outlet then your USB and lights run off of that not 12 volt. Check the outlet that it is plugged in to to be sure it is powered. Peace Dave

If you can't get sink covers from Heartland there is another option that you might consider. Sams Club, and maybe Walmart, sells a large cutting board that is just about the right thickness (½") to fab a sink cover. I haven't tried that but it's something to check into. I also think that would...

Thanks for the update. The new valve looks great. Peace Dave

Like Dan said inspect the wire bundle closely. Where the wires enter the slide on that model is bad pinch point and wires may have been damaged. Look closely. You mentioned that the feed wire is white with orange. Stick a pin through that wire to verify if you have 12 volts to ground before it...

I think you need to check the neutral wires which are typically white. Check the connections at your battery, make sure they are tight. Follow the - terminal to a Buss bar and check the connections there. Check all connections that you can find. There are several throughout that are spliced...

It looks like there is or was something under the slide. Since the marks are outside of the roller I don't think the roller is the problem. Have you looked closely under the slide from both the inside and outside? It's that a bedroom slide? The marks are only toward the cabin end so it's...

This for sale thread is closed. Please let us know when your item is sold. Peace Dave

It's actually pretty easy. When you click on + Reply to Thread, just above the box that you will type in your reply you will see three rows of little icons. Top row will have a little paper clip. If you click that you can attach an image. You will be prompted on what to do. Center row will have...

Jim, I've had 2" square tube welded between my spring hangers. This was done per Lipperts recommendation so I doubt that welding the extra structure would void your warranty. In fact they offered to do it for me. I would call Lippert and check with them. Peace Dave

Be certain that the water heater bypass (winterizing) valves are in the correct on/off positions. Also if you have an outside shower make sure that both faucets ore in the off position. Peace Dave

This for sale thread is closed per forum rules. Please let us know when this is sold. Peace Dave

Ebay has a bunch of different forms of a 12 volt 50 amp breakers. If your slides and level system both stop then i would replace only the 50 amp breaker. It's pretty common that these need replacing. And if you find one without mounting tabs they will most likely be okay as they will be held in...

For those wanting to add isolation valves here is an old thread dealing with just that mod. Hope it helps someone. Peace Dave

I would get it from CW, never look back and take it to another repair facility. With prior approval from Heartland you may be able to have an independent repair facility take care of it. And FYI, legal matters are not allowed on the forum. Peace Dave

I've been liking the Allstays app on my phone. Peace Dave

We've stayed at Campark in Niagara Falls when the Ontario chapter had their rally there a few years ago. Right on the shuttle bus route. You can purchase shuttle passes right at the campground office. Peace Dave

Looks like he might need a little rubbing compound as well. Peace Dave

At 125 feet you might get by with #4 copper wire. But because it is a long run you could always protect that wire by using a double pole 40 amp breaker rather than a 50 amp double pole. Peace Dave

This for sale thread is closed per forum rules. Please let us know when this is sold. Peace Dave

What model Lynx are you referring to? You might be able to find some information by looking here. Peace Dave

Sounds like it's time to replace your converter. Mine failed when it was about 4 years old. Peace Dave

With the air bags you have some ride adjust-ability, with the Timbrens you get what you got. JMO. Peace Dave

Sometimes it's called speaker cabinet carpet. Amazon Peace Dave

Not sure about your windows but I can remove the slider by grabbing the top and bottom of the slider and move it to one side or the other then pull it out. Maybe you can remove yours and have an easier time troubleshooting or fixing the latch. Peace Dave