Search results

using Hercules 901 14ply on our Torque 5th wheel toyhauler

plans had been made last year for those dates, so a no go for us. Also so many things have changed since the last rally

oops they do have different lengths

saw a Heartland you tube video where these are standard on some new 23 models. I'd check with your selling dealer or Heartland Customer service

you need some pins like these which are on Amazon. Tractor Supply & most hardware stores will have them 4 Pack Quick Release Pin, Diameter 1/4"(6.3mm), Total Length 3.75"(95mm), Usable Length 3"(76mm), Full 316 Stainless Steel, Bimini Top Pin, Marine Hardware

saw in a different forum that spankimo found loose wire on rear of unit, Easy fix for him

yes , if all you want to do is remove the 4 doors; by removeing the screws this allows the two door assemblies to be removed. Caution they are heavy!! If you want to remove the header & side rails that involves more. Good luck

Does anyone know where the frame tag is located on a 2018 Torque/Cyclone 5th wheel toyhauler.

I'd call Dometic & ask them about those DIP settings

make sure your outside shower is OFF if you have one! Been there done that as thety say

purchased Hercules 14ply last spring tp replace original tires on 2017 5th wheel, the originals started to crack from aging, very few miles on them.

check your fuses under the hood of the truck. Some models have seperate fuses for trailers, look in the owners manual. I had to replace one of mine when I accidently shorted a wire on the RV.

thought about going, then I see annual Lake of the Woods fishing trip is that week & too late to change those dates. Ya'll have fun

our 2018 doesn't vent outside either so far no problems ; but we are weekend/seasonal campers

starting point check the 12vdc fuses, look for a blown fuse. Some panels are not labeled correct that's why I'd check them all. Make sure you have LP gas flowing by turning on the stove top burners

same here for me

check the TOOLS tab above then USER Guides, Exterior, Awnings select which awning you have

a short would have blown a fuse somewhere, I'm wondering if you have a defective control button, since all started working after the rear was activated. The 20's for air temperature shouldn't have that much effect on the ATF in the system. You can call Lippert Customer Service & they will help...

sounds like you lost one leg from the pedestal if on 50amp. Depending how comfortable you are using a voltmeter check the pedestal legs. The power cord can be checked for continuity first. Connect cord to trailer remove fromt cover to breaker panel & turn on power; should have 110 volts on eack...

the Heartlands I've seen have those pins; mine came with 4 of them

you can try changing the Anderson valve to different positions & back to CITY. Make sure the pressure has been released on the system by opening a hot & cold faucet before changing positions. Otherwise it's the check valve mentioned in post #2. Good luck

yep use those

those are the low point drains for the pex plumbing lines NOT the tanks. Pump builds the pressure to puch the water out of those two; Blue =cold water lines & RED is hot water lines used for winterizing the system The tank vent hoses are a clear braided material

if you are going to be NOLA I wouldn't waste money washing till you get back home!!! Salt in the air near the Gulf of oceans will do as much damage while there as what salt you will pick up traveling south. My two cents worth

you will have a line(maybe two ) without valves on them; these are overflow lines(vent) for the fresh water tank. Mine are on the off door side (road) just in front of the main slideout. I installed valves on those so it wouldn't siphon the water out of the tanks when traveling with full tank...

some have posted, with the city supply shut off & the pump off , open any faucet to relieve the pressure in the system, then rotate the Anderson valve to different position & back to city that might work! Otherwise the check valve is stuck open, normally located on or next to the pump.

is there two screws on the bottom rail keeping the TV tight in the mounting bracket? Seen other post that had those screws

like stated in post #3 I have a strap the releases the swing out arm. If the strap is missing look closely for a pin in the bottom of the arm & try pulling that pin downward.

should be a fuse in the 9 pin power contol harness. Join the Lippert Communities group everything you need to know on the Lippert level control system plus more is in their materials.

I wouldn't, I'd support under the main frame rails, those are designed to support the weight of the trailer.

some hitches out there go right over the gooseball. Just ordered the Crosswing by Lippert two weeks ago waiting for delivery. Luv the engine brake on my Silverado when towing.

off hand I don't remember seeing the sq ft of any RV listed. Just get a tape measure & add the numbers.

and I thought this was a Heartland RV forum about RV'ing

the 2015 Silverado 3500HD we had would display that message at times WITHOUT a trailer connected to the truck. Once I started cleaning the 4-way flat connector in the bumper the issue happened less often if at all.

wdk450 isn't a new member by any means, he has lots of good infomation

going to make plans & since we're fairly new to RV'ing will skip this rally & I was looking forward to it. Can't wait for them to get their act together

call Heartland customer service with the last six numbers of your VIN handy, they should be able to tell you

turn your tanks off light one burner till the flame goes out'; turn off burner & then check your ignitors & wiring for sparks. After done checking then turn tank valves back on slowly.

that solar ready plug is just that a plug for small solar panel to maintian the battey. On our RV those two wires weren't even connected to anything in the battery compartment

"gap " is the distance from the ignitor tip over to the gas burner; 1/4" should be about right the spark will jump the "gap" to light the burner when you turn the knob. All of the burners & the oven light off of the same knob on our stovetop/oven