Question in regards to the upper bunk in the toyhauler. I have seen them up while the couch comes down by itself. In my research, I have seen people use pins to hold the top bunk in. I do not have any pins (bought brand new 2022). Does heartland use a different system than pins?
Gravity toyhauler upper bunk
- Thread starter GravityTH
- Start date
Dahillbilly
Well-known member
the Heartlands I've seen have those pins; mine came with 4 of them
Ok. Happen to have a picture? Don’t know why mine didn’t come with it. Unless it’s hidden somewhere.
david-steph2018
Well-known member
So, when you lower the couch, does the upper bunk also come down?
Our Road Warrior has 4 pins. These are straight keeper pins you can get at Lowe's, Home Depot or TSC stores.
HappiJac Power Bed Lift System Bunk Pins #94-618
Secure the upper bunk on your HappiJac power bed lift system! This set of four lock-up pins helps keep your bunk in place for travel and storage.Quick Facts: Set of four lock-up pinsHelps secure your upper bunk for storage and travel
So, when you lower the couch, does the upper bunk also come down?
Our Road Warrior has 4 pins. These are straight keeper pins you can get at Lowe's, Home Depot or TSC stores.
HappiJac Power Bed Lift System Bunk Pins #94-618
Secure the upper bunk on your HappiJac power bed lift system! This set of four lock-up pins helps keep your bunk in place for travel and storage.Quick Facts: Set of four lock-up pinsHelps secure your upper bunk for storage and travelstore.lci1.com
Awesome. Thanks. Yes when I lower the couch the bed also comes down.
david-steph2018
Well-known member
There should be a hole on each of the lift that goes all the way thru. These pins are long enough to go all the way through the lift bracket on the wall.
Here are instructions on installing the pins:
Here are instructions on installing the pins:
Hello - Bringing this thread back up. I ordered the pins almost 2 weeks ago to find out they are out of stock. Taking the TH out soon and wondering if anyone has an amazon link or Home depot that sells the same things. Thanks.
Also, just wanted to confirm that all I do is slide this in the hole to keep the top bunk up? Theres no lock or anything?
Also, just wanted to confirm that all I do is slide this in the hole to keep the top bunk up? Theres no lock or anything?
david-steph2018
Well-known member
Have you looked at Tractor Supply stores (TSC)?
On our Road Warrior, make sure the bed is up all the way, insert the pin, then I lower the lower bunk to take the weight of the top bunk off of the lower bunk.
The weight of the upper bunk holds the pins in place.
On our Road Warrior, make sure the bed is up all the way, insert the pin, then I lower the lower bunk to take the weight of the top bunk off of the lower bunk.
The weight of the upper bunk holds the pins in place.
Dahillbilly
Well-known member
you need some pins like these which are on Amazon. Tractor Supply & most hardware stores will have them
4 Pack Quick Release Pin, Diameter 1/4"(6.3mm), Total Length 3.75"(95mm), Usable Length 3"(76mm), Full 316 Stainless Steel, Bimini Top Pin, Marine Hardware
Home Depot
Found these, but the happijac pins says 3 7/16. These are only 3". Anybody think they'll work?
Kind of annoyed a brand new unit didn't come with the pins...
Found these, but the happijac pins says 3 7/16. These are only 3". Anybody think they'll work?
Kind of annoyed a brand new unit didn't come with the pins...
Dahillbilly
Well-known member
oops they do have different lengths
david-steph2018
Well-known member
I think 3" is too short. It needs to go all the way thru the help support the weight.
Thanks!!! found on amazon!
Ordered the one dahillbilly suggested on amazon will report back to see if it fits! Gotta love amazon. haha.
