Search results

We did all 5, ours had a 2015 date code. Have not got them on the rig yet due to some health setbacks, but I’m considering offering the unused spare to my coworker for a tire swing. [emoji41] Sent from my iPhone using Tapatalk

Gotcha down! Sent from my iPhone using Tapatalk

I love it! Where did you get the table? How long is it? Sent from my iPhone using Tapatalk

I had another thought, would kind of cleaning product are you using? Maybe the cleaning product caused a reaction with the vent paint and caused the backside of the vent paint to “run”? Sent from my iPhone using Tapatalk

Another thought, could there have been water damage to the floor just before you took ownership? Rust just appearing afterward? Sent from my iPhone using Tapatalk

The foam is restricting to some extent, the furnace is not designed to have filters. So it could, over time, cause issues. Edit: I have the same flooring in my 2016 BC. I only have one floor register, in the bathroom. I added a damper style vent, but make very sure to keep it open when using...

Maybe the vinyl is getting too hot because the register is blocked? The hot air trying to find an escape, causing the vinyl to discolor? Sent from my iPhone using Tapatalk

It looks like there is foam blocking the vent? There should not be a filter on the furnace vents at all. That may be the source of your problem, maybe melted foam?? Sent from my iPhone using Tapatalk

If you are committed to replacing with CheapHeat electric only solution, be aware that unless wired specifically to run on both, they run on only 30amp -OR- 50amp. This may limit you if you cannot find the appropriate electrical connection. Be aware that CheapHeat uses as much electricity as...

Got it! Sent from my iPhone using Tapatalk

Welcome Rex and Renee! Our rally is usually one of the first of the season in March!! Hope to see ya there! Sent from my iPhone using Tapatalk

Are you speaking of the spray-on roof where they come to you, or do you want a far superior product, FlexArmor? Here’s what we had done, we paid $185 a linear foot, measured from the back edge to about 4” in front of the front cap seam: https://rvroof.com Sent from my iPhone using Tapatalk

Years ago, window flashing tape was recommended, and that is what we’ve used without fail. Clean with Lysol wipes before applying. It may give and stretch some with time, but it has not come unstuck. Sent from my iPhone using Tapatalk

I really enjoyed Rik Roberts, the comedian that impersonated Barney Fife. Sent from my iPhone using Tapatalk

My bad, it was tinted acrylic. Sent from my iPhone using Tapatalk

Welcome from the West Texas Chapter Leaders! Congrats! Elkridge is a great brand, we had one for 6 years. Where in Central Texas? Sent from my iPhone using Tapatalk

As Dan said the low point drains are probably the cause. But also, heat from one vent to the underbelly won’t keep the entire space very warm. We like to take our rig skiing, so we have had the freeze ups and learned what works and what doesn’t. We added heat pads to our water lines going to...

Another note, often in the winter the door becomes hard to close. I think it’s due to the heat vent under the stairs, that blows warm air on the inside of the door, while it’s cold outside, causing it to warp slightly. It seems to go back to normal once the temps are less dramatic. Sent from...

JimB helped us procure tinted Lexan already cut to fit for the top, bottom and slider. Unfortunately our measurements were off about 1/8”, and in the process of trying to make it fit, we cracked the top pice of Lexan. So we have it on the bottom and slider only, leaving the top part as screen...

Post some pics! Glad it was uneventful, those are rare. [emoji41] Sent from my iPhone using Tapatalk

A few more years, he’ll be eligible for teacher retirement. Then maybe the door for other options opens up. ;) Sent from my iPhone using Tapatalk

Argh, we probably can’t make it. Football season will be starting. Sent from my iPhone using Tapatalk

Added Bob, and Norm & Tammy’s dates! Sent from my iPhone using Tapatalk

Our Splendide Combo has a compartment for liquid fabric softener, we use Downy. Sent from my iPhone using Tapatalk

We actually added a portable unit this summer, vented out a small slideout window. (Created our own spacer to fit the opening.) We bought a 12k unit, and it actually cools faster and quieter than the roof air unit in the same space. It was an Arctic King from WalMart. It even has...

Typically we leave the grey tank valve open for the tank the washer drain flows into if running the multiple loads, so there’s never a chance of backup/flooding. Forgot once, caught it backing up into the shower basin, just before it overflowed! Sent from my iPhone using Tapatalk

Welcome to the Brooks! Hope to see you at a rally down the road! Sent from my iPhone using Tapatalk

You want the shortest, straightest run possible for the 4” vent pipe. These things don’t have a removable lint filter like a residential dryer, supposedly lint is flushed out in the water drain. However, we noticed we have to remove and clean out the dryer 4” vent pipe periodically as it...

Will be great to see y’all again! Sent from my iPhone using Tapatalk

Got it! Thanks! Sent from my iPhone using Tapatalk

Good idea, Jim. I will have to call Heartland and see if they still carry this pattern. Sent from my iPhone using Tapatalk

No only a single unit (a/c, furnace, heat strip) each thermostat already controls, I believe. My living room thermostat supposedly can control zones but I don’t have them. Since this thermostat controls the living ac and furnace, it was the one I wanted remote control for. Sent from my...

Yes, Jim, they have already committed to be a part of the rally! They want to bring rigs again as well. Sent from my iPhone using Tapatalk

Hi all, I wanted to share my recent experience with the Micro-Air EasyTouch RV Touchscreen Thermostat Control. I have been eyeing this for a while, and when the Black Friday discount was offered for Heartland Owners, I took the plunge. Remember, I’m a gal, so the appeal of this product was the...

Great to hear! Any others that have said they are interested, please post here when you make your reservations.

Here’s what they look like if you catch it before the tread lets go: Sent from my iPhone using Tapatalk

Dan, you’re right, ours on our 2010 said “TOWMAX STR” “POWER KING”. If the tread pattern looks like this, ditch them quick! Sent from my iPhone using Tapatalk

I would not trust those tires further than you can throw them. Since 2009, TowMax Trailer King tires have been bursting on a variety of RVs for no reason at all. There’s a long history of it if you dig around the forum, or even google them. Personally, we caught ours just before they...

I agree. Do the “cleaning process” in your manual multiple times, you may be surprised what ends up coming out of it and gets it working correctly again! Check out this thread: Strange sound from Splendide Combo...

There may also be an inline fuse very near the pump. Locate your pump and check it. Usually behind the basement wall in your pass through basement storage. Sent from my iPhone using Tapatalk