Just had my BH3670 in the RV shop. (Very reputable shop) I wanted them to adjust the rear slide on drivers side as it appeared to be crooked. The slide seal was barely touching on the top and bent pretty good on the bottom, so I wanted them to adjust it up to square it up. They said they see this quite often and that the frame is sagging in the rear and when they put jacks under the frame in the rear, it straightened right out. Supposedly Heartland knows about this problem and the fix is to weld supports on the frame to straghten it out. Has anybody heard about this and exactly what is the fix. Where and how do you weld the supports. Would appreciate response from somebody that has had this problem or somebody that knows of the fix.
Thank,
Jim
Thank,
Jim