We have 3 slides in our 2013 Landmark Mesa. Two of those are hydraulic and one (the lighter one in the bedroom) is electric. This past week the electric slide has started not working from the rocker switch at the control panel but it works fine with the remote. Any ideas on how to troubleshoot and remedy this situation? The slide works as it should with the remote. I am not currently at the unit but when I get there I will check the connections on the rocker switch at the control panel. Any other thoughts or suggestions?
Coincidentally we had our unit in at our dealer last week as we had to have the breaker on the hydraulic system repaired. Our Lippert Level Up system and hydraulic slides were tripping the 50 amp auto reset breaker and we had it replaced with an 80 amp breaker per Lippert's recommendation. We are now permanently parked at our summer location and will not get to the dealer again for some time so want to try to fix this soon.
Coincidentally we had our unit in at our dealer last week as we had to have the breaker on the hydraulic system repaired. Our Lippert Level Up system and hydraulic slides were tripping the 50 amp auto reset breaker and we had it replaced with an 80 amp breaker per Lippert's recommendation. We are now permanently parked at our summer location and will not get to the dealer again for some time so want to try to fix this soon.