So, after reading so many posts about campground electrical issues, we decided to add the progressive industries EMS-HW50C.
Question I have is; where (electrically) does this need to be wired in?
Our rig is a Gateway 3200rs.
We do not have the generator prep package, nor do we have any generator transfer switch.
The main circuit panel is in the kitchen in the side of one kitchen cabinet with little real access to the rear of the electriccal panel.
The converter/charger is in the basement storage with easy access thru the wall panel.
I believe that the shore power cord goes from the external plug to the circuit panel first; and then on to the converter/charger. I am hoping that someone else can confirm that for me.
I was hoping to install the EMS-HW50C in the basement just before the converter/charger because that would be easy, but I believe that would not be the correct place.
Has anyone installed a hardwired surge protector behind that main distribution panel? Was there room?
Is my assumption correct that the EMS-HW50C should be installed on the input side of of the main control center panel?
Any suggestions or experiences are most appreciated.
Question I have is; where (electrically) does this need to be wired in?
Our rig is a Gateway 3200rs.
We do not have the generator prep package, nor do we have any generator transfer switch.
The main circuit panel is in the kitchen in the side of one kitchen cabinet with little real access to the rear of the electriccal panel.
The converter/charger is in the basement storage with easy access thru the wall panel.
I believe that the shore power cord goes from the external plug to the circuit panel first; and then on to the converter/charger. I am hoping that someone else can confirm that for me.
I was hoping to install the EMS-HW50C in the basement just before the converter/charger because that would be easy, but I believe that would not be the correct place.
Has anyone installed a hardwired surge protector behind that main distribution panel? Was there room?
Is my assumption correct that the EMS-HW50C should be installed on the input side of of the main control center panel?
Any suggestions or experiences are most appreciated.