Frame Flexing San Antonio Update
Hi to all,just updating frame flexing post from about a month ago,just got the unit back from the shop,no frame flexing going on it was less than steller workmanship on the assembly line the panel from the hitch to the bottom of the front storage doors was mounted wrong causing stress at the rounded corner and it was pulling away from the side wall,shop removed panel and restalled right.One other problem we had was the heater quit here again workmanship on the line,the positive wires behind the heater were installed rather shoddy with strands of wires exposed from around the wire nuts and they arced with the neg. wires, burned about 4 in. of wire,Shop Man said it was real close to burning the rig down with us in it. I have also had to replace a slider switch while I had that panel out I discover a hole bunch of loose wire fittings, This rig is only a year and a half old,and as been towed about 8000 miles,for what we had to pay for this rig I would consider this sad. This is only part of the problems we have had,so you can see WHY we are NOT real happy with this Landmark. Thx what listening.