Project LM 365

[Jesstruckn/Jesstalkn]

I did do a do over today. Hopefully the third time's the charm !!!!!
I tried the glue on 360 siphon Vent twice now and lost them both times. So now I did the full assembly unit that screws on. These will not be falling off.
I also wanted to check around my pipes to see if the fuems could be coming in. They were all sealed up tight.

I did have to modify these to fit closer to each other.

Sent from my XT1585 using Tapatalk

 

[esscobra]

I put two of them on when I picked up mine in late feb- same ones and used screws- 2 days later 35mph winds and 3 hour drive home - held up good- checked them last month and all sealed up still and no odor issues- I think you will be set now-

 

[jbeletti]

Jerrod - are you saying your 360 Siphons ripped off the roof, as in "screws pulled out, sealant torn apart"?

I put 4 on my last coach and all remained after 2.5 years. Cookie and I just put 4 on the current coach. I have a 5th one on the way as I didn't think I needed 5.

 

[Jesstruckn/Jesstalkn]

No I lost the 360 siphon glue on type Jim
Not this type. This type pictured will not be going anywhere !!!!


Sent from my XT1585 using Tapatalk

 

[BusManRG]

Ironic that you should be having this discussion right now. After looking at Jim's photos yesterday I was reminded that the 360 siphon vent cover was one of the little mods I was going to have Richard do right after we picked up our big horn. And with everything else happening they were forgotten until I saw Jim's pictures yesterday! Mentioned it to Richard last night . Glad I didn't place the order until I finished reading your post today Jerrod! I will make sure and get the ones that screw down.
Sandy

 

[jbeletti]

No I lost the 360 siphon glue on type Jim
Not this type. This type pictured will not be going anywhere !!!!

Ah - got it.

 

[jbeletti]

Ironic that you should be having this discussion right now. After looking at Jim's photos yesterday I was reminded that the 360 siphon vent cover was one of the little mods I was going to have Richard do right after we picked up our big horn. And with everything else happening they were forgotten until I saw Jim's pictures yesterday! Mentioned it to Richard last night . Glad I didn't place the order until I finished reading your post today Jerrod! I will make sure and get the ones that screw down.
Sandy

Here they are on LCI's website. They're also available on Amazon.com.

 

[BusManRG]

Here they are on LCI's website. They're also available on Amazon.com.

Ordered!!! Thanks! I don't see screw holes anywhere, but one of the comments on Amazon was that it was an incorrect photo of the item. We shall see!

Sandy

 

[Jesstruckn/Jesstalkn]

Sandy this is the part number of the good ones I installed today

Sent from my XT1585 using Tapatalk

 

[Bones]

Ordered!!! Thanks! I don't see screw holes anywhere, but one of the comments on Amazon was that it was an incorrect photo of the item. We shall see!

Sandy

I was curious so I did a bit of digging. Looks like LCi has replaced the 360 vent with generation 2. The par number for that is. SKU: 389380

 

[BusManRG]

I was curious so I did a bit of digging. Looks like LCi has replaced the 360 vent with generation 2. The par number for that is. SKU: 389380

Update on 360 Siphon:

Thought I'd share what I learned from a quick call to Lippert. I'm sharing here (sorry for using Jarred's awesome thread) since I know Jarred said he too would be needing units. The current part number is 389380 (might vary by color), HOWEVER, there have been changes made to the part and the part number was not changed. The newest version of said part contains 4 pieces, including a ring with tabs that can be screwed down. The potential issue is that both Amazon AND Lippert still have both the old 3 piece version and the new 4 piece version in their warehouses (remember, same part number, smh). When ordering by internet, either Amazon or Lippert, you could receive either version. If you specifically want the newer 4 piece version with the option to screw it down to the roof, then Lippert suggests you order by phone and make it clear that you want the 4pc model. Your customer service person can put a note with your order so it will be filled correctly. The gentleman I spoke with was great and said to call back when my Amazon order arrives and they will make everything good!

Sandy

 

[Jesstruckn/Jesstalkn]

Thanks Sandy
Send picture if you get the new one.
The ones I just installed was 1 piece and worked perfectly.
Wonder why they quit making them.
Glad I won thoes at the rally.

Sent from my XT1585 using Tapatalk

 

[Ace11]

Here is a Version of the Awning Tool

 

[Jesstruckn/Jesstalkn]

Very nice. Do you have more pictures ? What is that made out of ?

Sent from my XT1585 using Tapatalk

 

[For20hunter]

Here is a Version of the Awning Tool

You and Jerrod are so handy!!! I would love to have something like that to adjust my awning locks!!

Rod

 

[Jesstruckn/Jesstalkn]

Here is a Version of the Awning Tool

What is that made out of ?

Sent from my XT1585 using Tapatalk

 

[Jesstruckn/Jesstalkn]

We had a great time at the Spark's rally. What a group of wonderful people.

The Margarita machine was working overtime.

What a beautiful ride over Hwy 88 going to Jackson. I is 106° in Jackson today. I'd rather have the rain.

This was out our window when we stopped for a snack before Kirkwood.

Sent from my XT1585 using Tapatalk

 

[oldelmer1]

Hi Jerrod,

What kind of canopy is that in your first picture?

Is it free standing or attached to the table?

It looks really big....

Thanks,
Tom

 

[Jesstruckn/Jesstalkn]

Tom it mounts to the table. The mounts are adjustable any table length from a small table all the​ way up to 10'
They now sell them at Camping world

Sent from my XT1585 using Tapatalk

 

[oldelmer1]

Thanks Jerrod, the reviews are really mixed, do you like it?


Oh, and did you ever install your Horst Mircacle probes? If so, how do you like them?