That's the position it has taken with the collapse of the forward edge of the slide. It is as far back as I can move it into the slot but the front "feet" of the fridge rest on that shelf of the slide. Since that corner dropped down, it tends to have the fridge tilt just a hair forward. Being full timers we are more than 1800 miles from the selling dealer and after many years of experience, know we will get very little help from non selling dealers in getting it fixed with any dispatch. Even if the shelf is repaired I still have to find some means to fix the unit in place without much of any room to work with.
Got itshoved back as far as possible and pulled off the kick guard on front. I saw that it's on rollers of course. I got a screw between one roller and the floor another partially in a tab close to the floor but that one is questionable. In the mean time I whittled some small wedges and glued them to the floor in contact with the fridge to hopefully stop it from rolling forward. No way I can pull the unit and mount straps since the island blocks the fridge and it would have to be out to find some place to anchor them.
Got itshoved back as far as possible and pulled off the kick guard on front. I saw that it's on rollers of course. I got a screw between one roller and the floor another partially in a tab close to the floor but that one is questionable. In the mean time I whittled some small wedges and glued them to the floor in contact with the fridge to hopefully stop it from rolling forward. No way I can pull the unit and mount straps since the island blocks the fridge and it would have to be out to find some place to anchor them.
Last edited: