Search results

I checked for them too. No dice. I suspect they aren't being made anymore.

I looked. Neither are in stock. Bummer! The listings are on the site, but no "Cart" buttons.

It appears that all Atwood propane detectors are unavailable. Maybe they went out of business. I ordered a Briidea detector from Amazon. It probably won't fit and I'll have to improvise.

Thanks, Dave. That's exactly what I need to know.

Can you explain where to apply it?

I'd like to lube our living room and kitchen slides. The living room slide stuck at the top last time out. The same slide had been squeaking and making quite a bit of noise when it went in and out. I bought a can of slide lube. I'm not sure where to put it (no wise cracks!). Can you help. Bob

Re: Bighorn. NAME Actually, no. General Motors makes Chevy just as Heartland makes Bighorn.

Re: Bighorn. NAME My two cents: First of all, people who are buying a $50K trailer are not so stupid that they will be duped into thinking one model is the same as others. Consider Chevy. They make the Corvette (called a "Chevy Corvette") and the Spark ("Chevy Spark"). No one expects a Spark to...

Last Thursday we took the Keller Ferry across the Columbia river. It's a small boat that can hold a semi. We've taken it several times before on our way to Curlew Lake state park. Unknown to us, at the time, a new deckhand had us load onto a side lane (thee are 3 lanes). This is one of those...

Kim and I have to cancel. Sorry to do it so late. I've come down with something. Been in bed since Tuesday. I called the park and they said they have someone on the club waitlist who they will call. We'll miss all the fun. Thanks, Bob

We took our first trip this past week. We discovered that the "D" weatherstripping on the livingroom slide is gone! The "D" weatherstripping on the kitchen slide is hanging half off. The vertical weatherstripping on the livingroom slide is dropping down. This isn't the first time this happened...

I know that this forum is filled with Heartland apologists. I'm not one of them. My 2014 Bighorn had almost 30 issues which, eventually Heartland fixed. Most of my problems were with the dealer's slow schedule. Now we are starting our third season with our Bighorn. The good news The quality of...

Are you going to figure out who should bring sides vs desert. Rod and Kelly had a good system. We are both excited the rally is coming up!

I would normally stay out of this, but frankly this is one of those topics driven by myth. As previously stated, air is 80% nitrogen. So, if you are a nitrogen fan, you get 80% free. Oxygen, the other main component of air, is no more likely to leak out of a tire than nitrogen. The atomic weight...

Just a quick aside. There is a general RV forum (can't remember the URL) that has a Camping World section with an "Issues" subsection. I was getting the runaround from my local CW about honoring a price match and a fixed install price for my satellite dish. I complained on the forum and got a...

It doesn't???? Wow, you didn't order any options. Actually, my tow vehicle has plumbing for flammable fuel, oil, coolant, air conditioning gas/liquid, windshield washer fluid, brake fluid, transmission fluid, power steering fluid and lots of other things that if they break the way Heartland...

Both of our Dometic AC's failed too. They were replaced by our dealer without further ado. Unlike the cheerleaders you often find on forums like this, I share your concerns about Heartland build quality. I am happy to say that after a very long list of repairs the first year, things have settled...

It might be optimistic to assume you will find all the issues that need correction in just a day or two. It is also unusual for dealers to fix all issues right away. Even if they have free techs, parts need to be ordered. We have a 2,000 watt generator we have used just once. We don't dry camp...

I got an email about the new Bighorn today. For fun, I searched for dealers near my home in western Washington. Fife RV came up on the Heartland site. Has Fife been reinstated? They only show one 2015 Bighorn in their new trailer inventory. What's the story? Thanks, Bob

Thanks Rod. We have a pretty local Les Schwab. How are their prices? Thanks, Bob

Seattle is the 15th largest city in the United States. There are no Bighorn dealers anywhere close. Theire's one in Portland OR (a MUCH smaller city) which is over 150 miles away. I need to get bearing service before we travel this year. We also have to get the microwave/convection install...

have you tried running coax through the window directly from the signal source to the LR TV? That would rule out any problem other than the cable.

Re: Slides won't work (both electrical and hydraulic) I'm happy to report that the problem is solved. The slides work and the batteries are fully charged. Thanks! Bob

I have a 2014 BH. There are 2 sat cables in the UDC: One for the BR and one for LR. There are two cables going to the roof as well. I have my Trav'ler and multiswitch on the roof. It attaches to the two cables to the UDC. We have a jumper in each outlet pair from the roof to the appropriate room...

I replaced our Anderson valve last fall. It's very easy to do. It took about 15 minutes with a phillips screwdriver and a channel lock pliers. The connections are really just hand-tight, just needed the pliers to encourage a couple to open. One thing I learned is that once you connect the valve...

Re: Slides won't work (both electrical and hydraulic) Thanks Jim and Dan! We found the reset on the 2nd from the top breaker as you predicted, Jim. After about an hour we show good charge going in. I added a surge suppressor to the line we have going to the trailer just in case there was a...

Re: Slides won't work (both electrical and hydraulic) Thanks Jim. I'll try tomorrow. Stay tuned. Bob

Re: Slides won't work (both electrical and hydraulic) I know. Aren't they auto reset?

Re: Slides won't work (both electrical and hydraulic) I got into the front compartment. There is no terminal strip resembling the pictures that Dan posted. I confirmed that both batteries are dead and that the DC converter works and powers the lights, etc. I agree it may be a breaker, but I...

Re: Slides won't work (both electrical and hydraulic) Thanks Dan. I will have to wait until the weekend to check this out. It gets dark too early to do it after work. Why would the breaker pop? There was no load on the battery. The trailer is just sitting on our side lawn with AC power...

Yesterday, we went out to check on our 3160. All was dry and the power was connected (AC). However, when I tried to extend either slide, the switches did nothing. Since the bedroom slide is electric and the livingroom/kitchen slides are hydraulic, the problem has to be electrical (I think). I...

We were camping at Goldendale WA the end of Aug and drove the 100 miles each way to bring back a couple of dozen Voodoo doughnuts. If you are going to the rally, a trip to Portland for these is worth it! (maybe we can organize a run). Of course, there is always a line outside the store.

We'll be there! Arriving 7/29 and leaving 8/1. Sent you a PM with full details. Looking forward to the trip! This isn't far from Portland. That, for us at least, means a trip to Voodoo Doughnuts, the best west of NY.

We made our reservations and we will be there! Bob and Kim

There's low point drain under our 2014 BH 3160 centered just behind the rear leveling jack. - - - Updated - - - Our dealer (last year) and us this year just blow out the lines and put antifreeze in the drains. No need for antifreeze in the water lines. If you blow them out, not enough water...

I did ours today. 40 psi. I discovered that the HW heater bypass should not be on. If it's on, the air is stopped at the bypass and not get to the faucets hot water tap.

We will be arriving at 1 as well

We removed the desk and noticed the latch on the cabinet has a pivot that when the desk closes, holds it in. Kim rotated each latch out and then we tried again and they worked. We have no idea how the latches were locked with the desk out, all I figure is vibration bounced the desk out. On of...

Thanks for the info. I will call customer service directly.

Over the last year or so, I posted a few questions to "Ask The Factory". Without fail, Kary or someone else would address my question. About a week ago I posted two new questions. No one from Heartland contacted me either here or by email. Does support in Ask the Factory end with the warranty...